View Circuits [2.1]; Set System Time [2.2]; Set System Date [2.3]; Change Passcode [2.4] - Menvier Security TS790+ Installation And Programming Manual

Engineer's Menu 2
View Circuits
Each detection circuit may be viewed to
ascertain its status. The circuit status conditions
and resistance are shown below:
Status Response
Healthy None
Active Alarm
Tamper Tamper
Shorted Alarm
View Circuits Flowchart
Set System Time
The system time is displayed in a 24hr format on
all remote keypads and is also used to time
stamp events in the system event log.
Set System Time Flowchart
40
[2.1]
Normal Min. Max.
W W
2.2 K 54 4.1K
W W
6.9 K 4.1 K 54 K
¥ W
54 K
W W
0 0 53
[2.2]
Set System Date
The system date is displayed in a
day/date/month format on LCD remote
keypads. it is also used to provide date stamps
for events in the system log.
W
W
¥
W
Set System Date Flowchart
Change Passcode
This option allows the engineer to change their
passcode. The default passcode is 1234 but
the installation engineer should change this to
their own personal 4 digit passcode.
Change Passcode Flowchart
TS790+ & TS900+ Installation Manual
[2.3]
[2.4]