Switching From 'Away' To 'Home; Arming 'Instant; Forced Arming - Visonic PowerMaxComplete User Manual

Switching from 'AWAY' to 'HOME'

Do not disarm the system - just press
this operation reduces the security level, the
PowerMaxComplete will ask you to key in your
master user code or user code, thus making sure
that you are an authorized user.
PRESS RESULTANT DISPLAY
ENTER CODE
[Enter code] ARMING HOME
↓ (Exit delay) ↓
Move to
interior zone
ARM HOME
ARM indicator flashes during the armed state.
If an alarm occurred while the system was armed in
the AWAY mode, the display will respond differently:
PRESS RESULTANT DISPLAY
ENTER CODE
[Enter code] ARMING HOME
↓ (Exit delay) ↓
Move to
interior zone
HOME
(alternating)
ARM HOME MEMORY
ARM indicator flashes during the armed state.

Arming 'Instant'

You may arm AWAY or HOME without an entry
delay - any detection in any zone will trigger an
immediate alarm.
If you wish to arm AWAY-INSTANT, proceed as
follows.
PRESS RESULTANT DISPLAY
ARMING AWAY
ARMING INSTANT
(alternating)
PLEASE EXIT NOW
↓ (Exit delay) ↓
Vacate the
premises
AWAY
ARM indicator lights during the armed state.
D-300886
SECURING THE PROTECTED SITE
If you wish to arm HOME-INSTANT, proceed as follows:
. Since
_ _ _
HH:HH
ARM indicator flashes during the armed state.

Forced Arming

Forced arming allows you to arm the system even
though one zone or several zones are disturbed, and
the NOT READY message is displayed.
Automatic forced arming only works if the installer
allowed this option while programming your system.
_ _ _
Disturbed zones will be bypassed - they will not be
armed. The protected site will not have maximum
protection.
Note: When forced arming is carried out, the buzzer
HH:HH
"protests" by emitting a continuous tone during the exit
delay until the last 10 seconds of the delay. You can
silence this signal by pressing the arming button again.
When NOT READY is displayed, Forced arming
"AWAY" is performed as follows:
ARM indicator lights during the armed state.
When NOT READY is displayed, Forced arming
"HOME" is performed as follows:
mute the buzzer)
Go to interior zone
ARM indicator flashes during the armed state.
PRESS RESULTANT DISPLAY
ARMING HOME
ARMING INSTANT
(alternating)
ARMING HOME
↓ (Exit delay) ↓
Go to an
internal zone
ARM HOME
(alternating)
ARM HOME INSTANT
PRESS RESULTANT DISPLAY
ARMING AWAY
PLEASE EXIT NOW
↓
(Exit delay)
(to mute
the buzzer)
AWAY
PRESS RESULTANT DISPLAY
ARMING HOME
↓ (Exit delay) ↓
(To
HOME HH:HH
HH:HH
↓
↓
9