Parameter Descriptions - Panasonic KX-TDE100 Network Manual

Parameter Descriptions

Unit Status
Parameter
Phone Number
Unit Information
Model
Operating Bank
IPL Version
Firmware Version
*1 There are two memory banks. The Operating Bank number will cycle between these two memory banks, changing each time the
firmware is upgraded.
Description
Specifies the extension number of the KX-HGT100.
Specifies the status of the KX-HGT100 as follows:
•
Update Profile: Basic Setting is not programmed (e.g., factory default).
•
Registering: Registering the KX-HGT100 to the PBX.
•
Normal: The KX-HGT100 is registered.
•
Malfunctioning: The KX-HGT100 is in an error state.
•
LAN cable unplugged: The LAN port of the KX-HGT100 is not receiving
any network signal.
•
IP Address expired: IP address lease time from the DHCP server has
expired.
•
IP Address conflict: The IP address of the KX-HGT100 conflicts with other
network devices.
Specifies the model number of the KX-HGT100.
Specifies the number of the memory bank for the current firmware.
Specifies the IPL (Initial Program Loader) version.
Specifies the current firmware version of the KX-HGT100.
4.4.1 Registering IP Telephones
*1
IP Networking Guide 85