Panasonic KX-TDE100 Network Manual page 37

When not using a DHCP server:
a.
Select Disable for the DHCP Client setting.
b.
For KX-TDE100/KX-TDE200, type the IP
address of the IPCMPR card in the IP Address
for IPCMPR Card box. For KX-TDE600, type the
IP address of the IPCEMPR card in the IP
Address for IPCEMPR Card box.
c.
In the IP Address for VoIP-DSP box, type the IP
address of the DSP16 or DSP64 card.
d.
In the Subnet Mask box, type the subnet mask
address of the network.
e.
In the Default Gateway box, type the IP address
of the default gateway.
f.
Click Apply.
8. Follow the instructions of the Quick Setup wizard in Quick Setup.
After Quick Setup is completed, if the IP addressing information was not changed, the IP-PT
registration screen is displayed. For information on registering IP-PTs to the PBX, refer to "Registration
of IP-PTs" in "4.4.1 Registering IP Telephones".
Programming from the system menu
1. The IP addressing information for the IPCMPR/
IPCEMPR card can also be assigned from the
system menu.
a.
Under Configuration, click Slot.
b.
Move the mouse pointer over the IPCMPR/
IPCEMPR card. A menu will be shown under the
mouse pointer.
c.
Click Card Property.
2. When using a DHCP server:
a.
Click the LAN Setting tab, then select Enable for
the DHCP Client setting.
b.
Click Apply.
*1
*2
*3
*4
4.1.1 Assigning the IP Addressing Information
IP Networking Guide 37