Registering Ip Telephones - Panasonic KX-TDE100 Network Manual

4.4.1 Registering IP Telephones

4.4 Registering IP Telephones
4.4.1 Registering IP Telephones
After the programming of the PBX and IP telephone is finished, the IP telephone must be registered to the
PBX. This is done using the Maintenance Console.
Registration of IP-PTs
1. a.
Under Configuration, click Slot.
b.
When registering with V-IPEXT32 Card:
Move the mouse pointer over the white PBX
image at the bottom of the screen for the virtual
slots, and click Select Shelf. Move the mouse
pointer over the V-IPEXT32 card. A menu will be
shown under the mouse pointer.
When registering with IP-EXT Card:
Move the mouse pointer over the IP-EXT card. A
menu will be shown under the mouse pointer.
c.
Click Port Property.
2. Click Registration.
A dialogue box will appear. Non-registered
(available) extension numbers and names are
displayed on the left.
3. a.
Highlight numbers and names and click the right
arrow to select them for registration.
b.
Click Next. A screen will appear with information
on the current IP-PT extension number and
name, and index number for programming.
Note
•
•
c.
If the registration is still in progress, the dialogue
box will show "Registration Executing".
If the registration is successful, the dialogue box
will show "Registration Completed". Click Close.
78 IP Networking Guide
If the IP-PT has been connected to the
LAN and power has been turned on, the
IP address of the IPCMPR/IPCEMPR
card will be assigned automatically.
If not, connect the IP-PT to the LAN and
turn the power on within 15 minutes after
this operation is done. The IP address of
the IPCMPR/IPCEMPR card will then be
assigned automatically.