Panasonic KX-TDE100 Network Manual page 69

KX-NT321
To start programming
Press PROGRAM while
"Searching" is displayed.
To set the DS field value for the primary port
Select "Primary Port".
Diffserv
0.0–7.7
To set the DS field value for the secondary port
Press HOLD to return to
the Diffserv setting screen.
Press SP-PHONE.
To end programming
Press HOLD to return
to the Menu screen.
Select "QoS".
Press SP-PHONE.
Press SP-PHONE. Select "DS (Enable)".
Press SP-PHONE.
Select "Secondary Port". Press SP-PHONE.
Diffserv
0.0–7.7 Press SP-PHONE.
Press STORE.
4.3.3 Setting the Diffserv Parameters
Select "Diffserv".
Press SP-PHONE.
Select "DS (Enable)".
The IP-PT will reboot
and can then be
registered to the PBX.
Press SP-PHONE.
IP Networking Guide 69