KX-NT321
To start programming
Supply power to the IP-PT.
To enter the IP address of the IP-EXT16 card in the Primary PBX (PBX IP Address)
Select "PBX".
Press SP-PHONE.
To enter the IP address of the Secondary PBX (If required)
Select "Secondary
PBX".
Press HOLD twice to return
to the Menu screen.
To set VLAN parameters
To the VLAN settings
OR
To end programming
Press STORE.
Note
To confirm the connection to the secondary PBX after programming, (1) turn the IP-PT's power off,
and (2) hold the STORE button and 2 key while turning the power on.
Press PROGRAM
while "Searching" is displayed.
Select "PBX IP
Press SP-PHONE.
Address".
PBX IP Address
Press SP-PHONE.
The IP-PT will reboot
and can then be
registered to the PBX.
4.3.1 Assigning the IP Addressing Information
Press SP-PHONE.
Press SP-PHONE.
PBX IP Address
Select "Primary
PBX".
Press SP-PHONE.
IP Networking Guide
55