Programming The Ip-Ext16 Card; Assigning The Ip Addressing Information - Panasonic KX-TDE100 Network Manual

4.2 Programming the IP-EXT16 Card

4.2.1 Assigning the IP Addressing Information

When an IP-EXT16 card is placed on the LAN for the first time, it is necessary to assign IP addressing
information to the card. This is done using the Maintenance Console.
1. a.
Under Configuration, click Slot.
b.
Move the mouse pointer over the IP-EXT card. A
menu will be shown under the mouse pointer.
c.
Click Ous to set the card to out-of-service status.
d.
Move the mouse pointer over the IP-EXT card,
then click Card Property.
2. a.
In the IP Address box, type the IP address of the
card.
*1
b.
In the Subnet Mask box, type the subnet mask
address of the network.
c.
Click Apply.
3. If the IP address of the default gateway needs to be
entered:
a.
Click Common Settings. A dialogue box will
appear.
b.
In the Gateway Address box, type the IP
address of the default gateway.
c.
Click OK.
Note
To activate any changes made in step 3, it is
necessary to set all installed IP-EXT cards to
out-of-service status (OUS), then back to
in-service status (INS).
4. Move the mouse pointer over the IP-EXT card, then click INS to set the card to in-service status.
*1 Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2 Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3 Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
*3
4.2.1 Assigning the IP Addressing Information
IP Networking Guide 39