Panasonic KX-TDE100 Network Manual page 66

4.3.2 Setting the VLAN Parameters
KX-NT321
After assigning
the IP addresses
Select "VLAN (Enable)".
To set the VLAN ID for the primary port
Select "VLAN (Primary)".
Select "Priority".
To set the VLAN ID for the secondary port
Select "VLAN (Secondary)".
Select "Priority".
To end programming
Press HOLD three
times to return to the
Menu screen.
The VLAN priority of the primary port must be set higher than the priority of the secondary port. The larger the number, the higher
*1
the priority.
66 IP Networking Guide
Select "QoS". Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE. Select "VLAN ID".
*1
VLAN Priority
0–7
Press SP-PHONE. Select "VLAN ID".
*1
VLAN Priority
0–7
Press STORE.
Select "VLAN".
VLAN ID
1–4094
Press SP-PHONE.
VLAN ID
1–4094
Press SP-PHONE.
The IP-PT will reboot
and can then be
registered to the PBX.
Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE.