Panasonic KX-TDE100 Network Manual page 86

4.4.1 Registering IP Telephones
Basic Setting
Parameter
Location
*1
Language
Telephone Number
SIP ID
*3
SIP Password
*3
Proxy Address
*3
Proxy Port
*3
Registrar Address
Registrar Port
*3
SIP Domain
*3
Register Expire
Session Expire
*1 This parameter is not available with KX-HGT100C.
*2 This setting will be overwritten by the SIP Location Hold Time Max. setting of the PBX. For details, refer to "3.17 [1-1] Slot—Card
Property - Virtual SIP Extension" in the PC Programming Manual.
*3 These parameters can also be programmed by the KX-HGT100. For details about the procedure for the KX-HGT100, refer to "Basic
Setting programming through the KX-HGT100".
86 IP Networking Guide
Description
Specifies the location where the KX-HGT100 is installed.
Specifies the language to be displayed on the LCD.
Specifies the extension number of the KX-HGT100.
*3
Specifies the extension number of the KX-HGT100.
Specifies the password for the KX-HGT100.
Specifies the IP address of the IPCMPR/IPCEMPR card.
Specifies the port number associated with the IP address entered in Proxy
Address.
Specifies the IP address of the IPCMPR/IPCEMPR card.
*3
Specifies the port number associated with the IP address entered in Registrar
Address.
Specifies the IP address of the IPCMPR/IPCEMPR card.
Specifies the length of time (1–4294967295 seconds) that the KX-HGT100
sends the REGISTER message to the PBX.
Specifies the length of time (60–65535 seconds) after which the KX-HGT100
terminates SIP sessions when no communication is detected.
*2