B&G h1000 CND Manual page 56

appendix c
Route
Setup (menu)
SNR = Signal to Noise Ratio
SOG = Speed Over Gro und
Soft key
Speed
Speed Units
Split Map Display
Spot Depths
STR = Steering
Tide
Page 56
terms and functions
Sequence of Waypoints connected b y legs.
Only the currently selected/displayed route can
be navigated to or edited.
The Setup me nu is where all the settings and
adjustments are made.
The ratio of the magnitude of a signal that of
the noise (interference).
A calculation of the rate of moveme nt of the
boat over the ground.
There are 5 Softkeys, which have different
functions when you select different modes of
operation; the labels for the current functions
are shown on the screen immediately adjacent
to the keys.
The curre nt velocity at which you are travelling,
relative to a gro und location.
Sets the speed unit amo ng Kts = knots, Mp h =
miles per hour, Kph = kilometres per hour. The
default se tting is Kts.
In Split Map Display the screen is split between
showing the chart on the top of the scree n and
a useful information text box on bottom of the
screen.
Turns On/Off the displaying of Spot Depths (the
depth of the water in a specific and charted
position). The default setting is On.
The difference between COG and CTS. If COG
is 25° and CTS is 30°, then STR is 5° Right.
The periodic rise and fall of the surface of
oceans, bays, etc., due principally to the
gravitational interactions between the Moon
and Earth.
cnd