Selecting Time Interval; Selecting Vector; Delete Current Track - B&G h1000 CND Manual

cnd
track functions

Selecting Time Interval

It is possible to change the frequency that the
CND records the boat's position in memory. It
is important to match the
recording to the dista nce that your boat will be
travelling in order that the whole passage can
be tracked. To change the frequency, select
the "Interva l" option
CURSOR key and change the time betwee n
recording by pressing the ENTER key. The
maximum interval available is 1 minute which
gives a total maximum Tracking period of over
11 hours. The default setti ng is 10 sec.

Selecting Vector

Vector feature displays a vector line protruding
from the boat showing where the boat will be in
a set period of time. This line is based on the
boat's current speed and course and is useful
for indicating at any give n time where the boat
is heading. Vario us lengths of vector are
available, also Off to disable the Vector line
display. Use the up/down CURSOR key and
change the time between recording, press the
ENTER key to confirm.
The default setting is Off.

Delete Current Track

Deletes all the track memory. A warning
message appears, press the ENTER key to
confirm deletion.
settings
frequency of
using the up/down
Page 41