Routes; Main Setup Screen; Selecting A Route; Selecting A Route To Work - B&G h1000 CND Manual

advanced features
Uploading waypoints from a PC
Whe n uploading a series of pre-set waypoints from a PC via the NMEA interface (WPL), first press
the 'Setup' butto n and select 'Waypoints' from the menu. Then upload your data fro m the PC, the
information on your chosen wa ypoints will appear on the screen. Once the data has been
transferred, press the 'Clear' butto n twice to view the wa ypoints on the chart.
Page 28

Main Setup Screen

At anytime, you may add or delete waypoints,
see a route summary, reverse the direction of
the route or erase the entire route.
The CND can store up to 10 individual routes,
only one can be se lected as the current route.
Only the currently selected route can be
navigated to or edited.
Press the SETUP key

Selecting a route

Using the CURSOR keypad select Routes from
the Setup screen.
From the Main Ro ute screen, t he CND displays
a list of available routes.
Routes are permanently stored in the memory
as they are created.

Selecting a route to work

Scroll through the routes using the up/down
keypad, pressing
CURSOR
Softkey selects the ro ute.
Whe n an existing route is selected pressing the
VIEW Softkey will auto matically zoom and pan
the chart display to show the route on screen.
The route, sho wn b y straight segments, is
centred on the scree n.
The EXIT Softkey returns to the previous
screen.
cnd

routes

the SELECT