Marks; Adding A Mark; Converting A Mark To A Waypoint; Deleting A Mark - B&G h1000 CND Manual

advanced features
Page 34

Adding a Mark

Pressing the MARK key inserts a Mark on your
boat's position. In the Text Area info rmation on
Mark name, symbol and Latitude/Longitude is
shown. Press the CLR key to clear the
message.

Converting a MARK to a Waypoint

Place the cursor o n the Mark a nd press the
CONVERT Softkey, a window to confirm the
conversion is displayed.

Deleting a Mark

Place the cursor on an existing Mark, press the
DELETE Softkey, a window to confirm the
deletion is displayed.

Man Over Board

Press and hold the MARK key for two seconds
to place a MOB symbol at the boat's current
position. As soon as 'MOB' is selected an
Alarm window appears on the screen giving the
position that the MOB occurred.
Pressing the CLR key removes the Alarm
window.
Press and hold the MARK key for two seconds
displays the DISABLE Softkey .
cnd

marks