Moving Waypoint; Inserting A Waypoint - B&G h1000 CND Manual

getting started
Page 12
navigating on a route

Moving Waypoint

Place the cursor on the Waypoint and press the
MOVE Softkey, using the CURSOR keypad
move the Waypoint, a dotted line connecting
the Waypoint to the new position, is shown.
To place the Waypoint in the new position,
press the ACCEPT Softkey.

Inserting a Waypoint

Place the cursor on the route leg a nd press the
INSERT Softkey.
The line betwee n the two Waypoints is turned
into a dotted line (rubber-band), now move the
cursor to the new position.
Once you ha ve positioned the cursor at ne w
location, press the PLACE Softkey.
cnd