Editing Waypoints - B&G h1000 CND Manual

cnd
navigating on a route

Editing Waypoints

Move the cursor onto the Waypoint and press
the EDIT Softkey
Use the CURSOR keypad to select the field
and press the ENTER key.
To e nter a name use the CURSOR keypad to
insert the characters, then press the ACCEPT
Softkey.
To change the Symbol, use the CURSOR
keypad to select the Icon and press the ENTER
key.
If the Coordinates field is selected, press the
ENTER key and the n use the CURSOR keypad
to insert the value.
If the Colour field is selected, pressing the
ENTER key will display a window with 8
different colour, use the CURSOR keypad to
select the desired colo ur and press the ENTER
key.
Then press the ACCEPT Softkey.
getting started
Page 13