Finding Information; Time To Go; C-Mapnt Information; Getting Quick Information - B&G h1000 CND Manual

getting started
Page 14

finding information

Time To Go

TTG value is displayed on the Display Page,
available by pressing the PAGE key twice and
the XTE Softkey.

C-MAPNT Information

On the display you will see a variety of Ico ns
and symbols.
Refer to the
their expla nation (example shown).

Getting Quick Information

Place the cursor on a chart symbol such as a
Nav-Aid, Wreck, etc. and a special pop-up
window is displayed. This feature ca lled "Quick
Info" identifies the symbol and displays the
information about Nav-Aids.
To expand information about that object press
the EXPAND Softkey.
Pressing the ALL Softke y displays all available
information about that cartographic point.
Use the CURSOR keypad to scroll through the
list, press the ENTER key to expand, If the
information is in several pages use the
CURSOR keypad to scroll through the following
pages.
To return to the previous page and to exit press
the CLR key.
At the bottom right hand corner a window
displays the selected objects icon.
cnd
Handbook for