B&G h1000 CND Manual page 53

cnd
terms and functions
LOG
Longitude
Magnetic Deviation
Magnetic Variation
Map Orientation
Mark
Marks
Memory CARD
Minimum Depth
MOB = Man OverBoard
Inserting MOB
Speed of the boat relative to the water.
The angular distance East or West of the prime
meridian (Greenwich meridian) as measured by
lines perpendicular
converging at the poles from 0° to 180°.
The angle between the Magnetic North a nd the
Compass North.
The angle between
geographic meridians at any place, expressed
in degrees West or East to indicate the
direction of magnetic North fro m true North.
Selects the orientation of your chart, North Up:
the map is shown with North upwards. Track
Up: the map is shown with the boat's current
heading upwards.
The default setting is North Up.
If Track Up is selected, a window is opened to
insert the Resolution angle.
Reference points related to cursor position.
Turns on or off the user entered Marks.
The default setting is On.
The CND uses the optional User C-CARD to
save user data.
Sets the minimum depth that the navigator
wants the boat to go into. This value sets the
depth area shading i.e. all depth a reas less
tha n this value are shaded (not a n alarm)
The default setting is 10m.
It is a n important functio n useful in the case
someone or something falls o verboard.
As soon as 'MOB' is pressed, then an Alarm
window appears in the screen giving the
position that the MOB occurred.
appendix c
to the parallels and
the magnetic and
Page 53