Track Functions; Enabling Track Storing; Selecting Active Track; Displaying Track - B&G h1000 CND Manual

settings
Page 40

Track functions

A very useful feature of the CND is the ability to
store and display exactly where the boat has
been. This feature, referred to as Tracki ng, can
provide invaluable information about the effect
of tide and wind influence on the boat's
progress as well as giving an indication of the
helmsman's performance.

Enabling Track Storing

To switch on/off the track storing, select Tracks
from the Setup me nu, use the CURSOR
keypad to scroll down to Activate Track and
press the ENTER key to toggle between on
and off.
Note
It is not possible to use the track storing if you
are no t receiving a va lid fix.

Selecting Active Track

Use the CURSOR keypad to scroll to Current
Track, and pressing the ENTER key repeatedly
to select the desired number of the active track.
The default setting is 1.

Displaying Track

Use the CURSOR keypad to scroll to Visible
Track, press the ENTER key to make the track
visible (On) or hidden (Off). The default setting
is On.

Selecting Track Colour

Using the CURSOR keypad to scroll to Colour,
press the ENTER key and use the CURSOR
keypad to select the desired colour from the
eight colours availab le for the selected track.
Press the ENTER key to select the colour. The
default co lour is black.
cnd
track functions