Power/Data; Nmea In (Instrument Interface); Fastnet - B&G h1000 CND Manual

cnd
electrical connections
Use cable Part No. BGM-023005
With this connector
Use cable Part No. BGM-023006
With this connector
2
1
Front view of
male connector pins
3
5
4

Power/Data

This is the main Power a nd Navigation NMEA
port. The CND receives data from the GPS
receiver and sends data to the instrument
system using this port. Sentences decoded:
DBT, DPT, GGA, GLL, GSA, GSV, HDG, HDM,
HDT, MWV, RMC, VHW, VTG, VWR, VWT,
WPL, ZDA a nd DTM (B&G special). Sentences
Transmitted: APA, APB, BOD, BWC, BWR,
DBT, GGA, GLL, HDG, HSC, RMA, RMB,
RMC, VTG, WCV, XTE, ZDA and ZTG.
Pin Colour Signal
Red 1 +12 Vdc
Black 0 Vdc /NMEA OUTPUT (GND)
Blue NMEA OUTPUT +
Green NMEA INPUT +
White UNUSED
Yellow NMEA INPUT –
Screen SCREEN

NMEA In (Instrument Interface)

Auxiliary NMEA input port for NMEA messages
transmitted by the
Sentences decoded: DBT, DPT, HDG, HDM,
HDT, MWV, VHW, VWR, VWT and WPL.
Pin Colour
RED 1
Blue
Green
2

Fastnet

One FastNet² connector is provided at the rear
of the unit. For connection to the h1000
system.
Pin Number
1
2
3
4
5
appendix b
instrument system.
Signal
NMEA INPUT+
NMEA INPUT-
SCREEN
Signal
12V
Busy
FastNet²-
FastNet²+
0V
Page 47