Ricoh M080 Service Manual page 231

Common KeyInfo W(riting)
Writes to flash ROM the common proof for validating the device for
@Remote specifications.
Note:
5870
These SP settings are required to connect @Remote or must also be
set after the board is replaced.
Even if @Remote is not connected, these settings are used for Web
validation, so at least SP5870 003 must be enabled.
5870 001 Writing
5870 003 Initialize
SDCardAppliMove
5873
Allows you to move applications from one SD card another. For more,
please refer to the "SD Card Application Move" section.
5873 001 MoveExec
5873 002 UndoExec
Option Setup
5878
Press [#Enter] to initialize the Data Overwrite Security option.
ROM update
5886
The setting of this SP allows or prohibits updating the ROM.
0:Yes, 1:No
SM Appendix
Writes the authentication data (used for NRS) in the memory.
Initializes the authentication data in the memory.
Executes the move from one SD card to another.
This is an undo function. It cancels the previous execution.
Data Overwrite Security (DOS) Setup
3-53
Printer Engine Service Mode
M080