Ricoh M080 Service Manual page 223

Complexity Opt 4
Use this SP to set the conditions for password entry to access the local
address book. Specifically, this SP limits the password entry to symbols and
defines the length of the password.
5846 065
[0to32/0]
Note: This SP does not normally require adjustment. It is enabled only after
the system administrator has set up a group password policy to control
access to the address book.
5848 WebService
5848 004 ac:ud
5848 009 ac:jc
5848 011 ac:dm
Log Type:Job 1 DFU
5848 210
[0 to 0xFFFFFFFF/0/1]
Log Type:Job 2 DFU
5848 211
[0 to 0xFFFFFFFF/0/1]
Log Type Access DFU
5848 212
[0 to 0xFFFFFFFF/0/1]
5848 213 PrimarySrv DFU
5848 214 Secondary Srv DFU
StartTime DFU
5848 215
[0 to 0xFFFFFFFF/0/1]
IntervalTime DFU
5848 216
[1 to 100/1/1]
SM Appendix
Switches access control on and off.
0000: OFF, 0001: ON
Note: These SP codes are for display
only; they cannot be changed.
3-45
Printer Engine Service Mode
M080