Ricoh M080 Service Manual page 228

Printer Engine Service Mode
5860 SMTP/POP3/IMAP
5860 013 POP Auth Encrypt
5860 014 POP Srv Port No.
5860 015 IMAP Srv Port No
5860 016 SMTP Rcv Port No
5860 017 Receive Interval
5860 019 Mail Keep Sett.
ParMail RectOut
[1 to 168/72/1]
5860 020
Sets the amount of time to wait before saving a mail that breaks up during
reception. The received mail is discarded if the remaining portion of the mail
is not received during this prescribed time.
M080
If POP before SMTP is enabled, then you can
use this SP to enable or disable encryption
mode for POP authentication.
[0-2/0/1]
0: Automatic
1: No encryption
2: Encrypt
Input the POP server port number
This SP sets the number of the IMAP4 server
port.
[1 to 65535/143/1]
This SP sets the number of the port that receives
SMTP mail.
[1 to 65535/25/1]
This SP sets the timing for mail received at
regular intervals.
[2 to 1440/3/1 min.]
Note: Setting this SP to "0" switches off receiving
mail at timed intervals.
This SP setting determines whether received mail
is stored on the server.
0: Received mail not stored
1: All received mail stored
2: Stores only mail that generated errors during
receiving
3-50 SM Appendix