Ricoh M080 Service Manual page 169

SD card error 1: Confirmation
The machine detects an electronic
license error in the application on the
SD card in the controller slot
immediately after the machine is
turned on. The program on the SD
card contains electronic confirmation
866 B
license data. If the program does not
contain this license data, or if the
result of the check shows that the
license data in the program on the
SD card is incorrect, then the
checked program cannot execute
and this SC code is displayed.
SD card error 2: SD card removed
The SD card in the boot slot when
867 D
the machine was turned on was
removed while the machine was on.
SD card error 3: SC card access
868 D
An error occurred while an SD card
was used.
SM Appendix
Program missing from the SD
card
Download the correct program
for the machine to the SD card
Insert the SD card, then turn the
machine off and on.
SD card not inserted correctly
SD card defective
Controller board defective
Note: If you want to try to
reformat the SC card, use SD
Formatter Ver 1.1.
2-21
Service Call Conditions
M080