Ricoh M080 Service Manual page 199

5507 166 Interval: LT
5507 172 Interval: HLT
SC/Alarm Setting
With @Remote in use, these SP codes can be set to issue an SC call when
5515*
an SC error occurs. If this SP is switched off, the SC call is not issued when
an SC error occurs.
001 SC Call
002 Service Parts Near End Call
003 Service Parts End Call
004 User Call
006 Communication Information Test Call
007 Machine Information Notice
008 Alarm Notice
009 Non Genuine Toner
010 Supply Automatic Ordering Call
011 Supply Management Report Call
Memory Clear
5801
Resets NVRAM data to the default settings. Before executing any of these
SP codes, print an SMC Report.
5801 001 All
5801 002 Eng Memory Clr
5801 003 SCS
SM Appendix
[0 or 1 / 1 / 1] 0: OFF 1: ON
[0 or 1 / 0 / 1] 0: OFF 1: ON
[0 or 1 / 1 / 1] 0: OFF 1: ON
[0 or 1 / 0 / 1] 0: OFF 1: ON
[0 or 1 / 1 / 1] 0: OFF 1: ON
Initializes items 2 to 15 below.
Initializes all registration settings for the engine and
process settings.
Initializes default system settings, SCS (System
Control Service) settings, operation display
coordinates, and ROM update information.
3-21
Printer Engine Service Mode
M080