Ricoh M080 Service Manual page 227

SMTP/POP3/IMAP
5860
5860 002 SMTP SW Port No.
5860 003 SMTP Auth Encryp
5860 006 SMTP Auth encryp
5860 007 POP Before SMTP
5860 008 POP to SMTP Wait
5860 009 Rcv Protocol
SM Appendix
Input the SMTP server port number
SMTP authentication enable/disable.
[0-1/0/2]
0: Disable
1: Enable
Encryption mode for SMTP authentication
enable/disable (Only valid if 5860 3 is set to
"enable")
[0-2/0/1]
0: Automatic
1: No encryption
2: Encrypt
Enable/disable POP before SMTP. If the SMTP
server does not have authentication, you can
enable POP before SMTP, them POP
authentication is available (SP 5860 13)
[0-1/0/1]
0: Disable
1: Enable
When using POP before SMTP, this SP mode
determines the maximum wait time between
POP authentication and connection with SMTP.
Communication stops if this time is exceeded.
[0-3000/300]
This SP specifies POP3 protocol or switches off
receiving.
1: POP3
2: IMAP4
3: SMTP
3-49
Printer Engine Service Mode
M080