Ricoh M080 Service Manual page 175

Undefined error
992 C
Operation Panel Management
Records Exceeded
994 C
Application Selection Error
997 B
Application start error
998 D
SM Appendix
Defective software program
An error undetectable by any
other SC code occurred
An error occurred because the
number of records exceeded the limit
for images managed in the service
layer of the firmware. This can occur
if there are too many application
screens open on the operation panel.
No action required because this SC
does not interfere with operation of
the machine.
An application did not start after
pressing the appropriate key on the
operation panel.
Software bug; change the
firmware for the application that
failed
A RAM or DIMM option required
by the application is not installed
or not installed correctly.
Software defective; change the
firmware for the application that
failed
An option required by the
application (RAM, DIMM, board)
is not installed
2-27
Service Call Conditions
M080