Ricoh M080 Service Manual page 161

Fatal kernel error
Due to a control error, a RAM
overflow occurred during system
processing. One of the following
messages was displayed on the
operation panel.
819 C
For more details about this SC code error, execute SP5990 to print an SMC report so you can
read the error code. The error code is not displayed on the operation panel.
Self-Diagnostic Error: CPU
The central processing unit returned
820 D
an error during the self-diagnostic
test.
Self-diagnostic error 2: ASIC
The ASIC provides the central point
for the control of bus arbitration for
821 D
CPU access, for option bus and
SDRAM access, for SDRAM refresh,
and for management of the internal
bus gate.
For more details about this SC code error, execute SP5990 to print an SMC report so you can
read the error code. The error code is not displayed on the operation panel.
SM Appendix
System program defective
Controller board defective
Optional board defective
Replace controller firmware
0x696e init died
0x766d vm_pageout: VM is full
4361 Cache Error
Other
Controller board defective
Software defective
ASIC (controller board
defective)
2-13
Service Call Conditions
M080