Ricoh M080 Service Manual page 183

1001 Bit Switch
005 Bit Switch 5
bit 0 DFU
bit 1 DFU
bit 2 Prevent SDK applications from altering
the contents of a job.
If this BitSw is enabled, SDK applications will not be able to alter print
data. This is achieved by preventing SDK applications from accessing a
module called the "GPS Filter".
Note: The main purpose of this BitSw is for troubleshooting the effects of
SDK applications on data.
bit 3
[PS] PS Criteria
Change the number of PS criterion used by the PS interpreter to
determine whether a job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
bit 4
Increase max number of the stored jobs
to 1000 jobs.
Enabled: Changes the maximum number of jobs that can be stored on the
HDD via Job Type settings to 1000. The default is 100.
bit 5 DFU
bit 6
Method for determining the image
rotation for the edge to bring on
Enabled: The image rotation will be performed as they were in the
specifications of older models for the binding of pages of mixed orientation
jobs. The old models are below:
-PCL-: Pre-04A models
SM Appendix
Printer Controller Service Mode
0
-
-
Disabled
Pattern3
Disable
(100)
-
Disable
3-5
1
-
-
Enable
Pattern1
Enable
(1000)
-
Enable
M080