Ricoh M080 Service Manual page 210

Printer Engine Service Mode
5816 084 Non-HDD Firm Up
5816 085 Firm Up User Che(ck)
5816 086 Firmware Size
5816 087 CERT: Macro Ver.
5816 088 CERT: PAC Ver.
5816 089 CERT: ID2Code
5816 090 CERT: Subject
5816 091 CERT: SerialNo.
5816 092 CERT: Issuer
M080
This setting determines if the firmware can be
updated, even without the HDD installed.
0: Not allowed update
1: Allowed update
This SP setting determines if the operator can
confirm the previous version of the firmware before
the firmware update execution. If the option to
confirm the previous version is selected, a
notification is sent to the system manager and the
firmware update is done with the firmware files
from the URL.
Allows the service technician to confirm the size of
the firmware data files during the firmware update
execution.
Displays the macro version of the @Remote
certification.
Displays the PAC version of the @Remote
certification.
Displays ID2 for the @Remote certification.
Spaces are displayed as underscores (_).
Asteriskes (***) indicate that no @Remote
certification exists.
Displays the common name of the @Remote
certification subject. CN = the following 17 bytes.
Spaces are displayed as underscores (_).
Asterisks (***) indicate that no DESS exists.
Displays serial number for the @Remote
certification. Asterisks (***) indicate that no DESS
exists.
Displays the common name of the issuer of the
@Remote certification. CN = the following 30
bytes. Asteriskes (***) indicate that no DESS
exists.
3-32 SM Appendix