Ricoh M080 Service Manual page 206

Printer Engine Service Mode
RCG Write Timeout
5816 009
Specifies the write timeout interval when calling the RCG.
[1 to 100 / 60 / 1 second /step]
RCG Read Timeout
5816 010
Specifies the read timeout interval when calling the RCG.
[1 to 100 / 60 / 1 second /step]
Port 80 Enable
Enables/disables access via port 80 to the SOAP method.
5816 011
[0 or 1 / 0 / – ]
0: Disabled
1: Enabled
@Remote Service 1
Enables/disables @Remote service.
5816 012
[0 or 1 / 1 / – ]
0: Disabled, 1: Enabled
RCG-C Registed
This SP displays the embedded RCG installation end flag.
5816 021
0: Installation not completed
1: Installation completed
RCG-C Regist Det
This SP displays the external RCG installation status.
5816 022
0: External RCG not registered
1: External RCG registered
2: Device registered
M080
-
3-28 SM Appendix