Post Error Messages - Fujitsu Primepower200 User Manual

13.5 Post Error Messages

Table 13.7 shows the names of typical components that are displayed on the LCD panel when POST detects an
error.
Message (2nd line)
0x-CPU#y CPU module
0x-SLOT#yy Memory module
Mem config error Misconfigured memory module(s)
0x-U2P(Timer)#y Counter timer
0x-U2P#y PCI interface
00-SCSI#x SCSI interface
00-PCIO(LAN) Ethernet interface
00-SuperIO(KB) Keyboard interface
00-SuperIO(Mouse) Mouse interface
00-SuperIO(FDC) Floppy disk interface
00-ESCC(TTY) Serial interface
0x-PCI#y PCI slot or PCI card in PCI slot
0x-TOD/NVRAM NVRAM chip
Table 13.7 Post Error Messages
Location of Error
13.5 Post Error Messages
Part to Replace
CPU module in CPU slot #y
on Systemboard #x.
Memory module in memory slot #yy
on Systemboard #x.
Memory module(s) inserted in
incorrect slots.
Systemboard #x.
Systemboard #x.
Systemboard #0.
Systemboard #0.
Systemboard #0.
Systemboard #0.
Systemboard #0.
Systemboard #0.
Systemboard #x itself or PCI card in
PCI slot #y on Systemboard #x.
NVRAM chip on Systemboard #x.
237