Adding Power Supply Units - Fujitsu Primepower200 User Manual

CHAPTER 6 PRIMEPOWER400 Rackmount (10U) Server

6.4.1 Adding power supply units

IMPORTANT
Adding an optional redundant power supply unit allows hot-swapping of the power supply units.
CAUTION
Power supply units (FEP) installed on the PRIMEPOWER400 Rackmount (10U) Server are hot-swappable. To
enable hot-swapping, use the tools (machine administration) contained in the "Enhanced Support Facility" to
perform hot-swapping. For details on how to swap power supply units, refer to the "Machine Administration
Instructions" included with the "Enhanced Support Facility".
110
Data Destruction
Data may be lost if hot-swapping of the power supply units is not performed
correctly. Contact the service engineer if a power supply unit must be
hot-swapped.