Figure 8.4 Rear Of Primepower600 Rackmount (10U) Server; Rear Side - Fujitsu Primepower200 User Manual

CHAPTER 8 PRIMEPOWER600 Rackmount (10U) Server
(6) CHECK LED
(7) POWER LED

8.2.3 Rear side

The names and functions of parts on the rear of the PRIMEPOWER600 Rackmount (10U) Server are as follows.
(11) 100Base-TX port
(10) Keyboard port
(5) Power control port
144
IMPORTANT
When the PRIMEPOWER600 Rackmount (10U) Server detects an error in the power line
or abnormal temperatures, the CHECK LED blinks and the power is automatically turned
off to prevent unit damage and ensure safety.
The CHECK LED blinks or lights up when the PRIMEPOWER600 Rack mount (10U) Server
detects an error.
When the power is turned on, the CHECK LED lights up and then goes out. This is not an error. If
the CHECK LED stays lit and does not go out at power on, this indicates an error.
When an error occurs, note down the details displayed on the LCD panel, and contact a service
engineer.
The POWER LED indicates the power state of the system. This LED lights up when the power is
on, and goes out when the power is turned off.
(1) AC power input
(7) RCI port
(8) Serial port A
(9) Serial port B
(6) UPS port
Figure 8.4
(3) Base PCI slots
Rear of PRIMEPOWER600 Rackmount (10U) Server
(4) Expansion PCI slots
(option)
(2) AC power input