Table 9.2 Installation Specifications Of The Expansion Disk Cabinet - Fujitsu Primepower200 User Manual

CHAPTER 9 Expansion Disk Cabinet
9.3.2 Installation specifications
Table 9.2 and Table 9.3 show the installation specifications for the Expansion Disk Cabinet.
*1:
*2:
172
Table 9.2 Installation Specifications of the Expansion Disk Cabinet (1/2)
Item
Weight
Power Supply Frequency
Voltage
Max. Current
Leak Current
Frame Resistance
Temperature Operating
Non-operating
Humidity Operating
Non-operating
Vibration Operating
Non-operating
Noise
Form Factor
If the ambient temperature exceeds 35 deg. C (95 deg. F) during operation, a warning message is
displayed. Take steps to rectify the problem immediately.
The indicated noise is the mean value of the measurements obtained in an anechoic chamber with
less echoic influence. The actual noise measured at the installation site may be greater than the
indicated noise due to background noise and echoes.
Specification
38 kg (83.78 lb.) (max.)
50/60 Hz (+2 ~ -4%)
Single phase Single phase
±
AC100 ~ 120V ( 10%) AC200
3.0 A (100V) 1.5 A (240V)
²
3.5 mA
²
100Ω
û
5 ~ 35 C (+41 ~ +95 F) (*1)
û
0 ~ 50 C (+32 ~ +122 F)
20 ~ 80% RH (non-condensing)
8 ~ 80% RH (non-condensing)
0.2 G
0.4 G
47 db(A) (*2)
Pedestal
±
~ 240V ( 10%)