Cabletron Systems SmartSwitch 8-slot User's Reference Manual page 67

To display OSPF information, enter the following commands in Enable mode.
Show IP routing table.
Monitor OSPF error conditions.
Show information on all interfaces con-
figured for OSPF.
Display link state advertisement infor-
mation.
Display the link state database.
Shows information about all OSPF
routing neighbors.
Show information on valid next hops.
Display OSPF routing table.
Monitor OSPF statistics for a specified
destination.
Shows information about all OSPF
routing version
Shows OSPF Autonomous System
External Link State Database.
Show all OSPF tables.
Show all OSPF areas.
Show OSPF errors.
Show information about OSPF export
policies.
SSR User Reference Manual
Chapter 5: OSPF Configuration Guide
ip show table routing
ospf monitor errors destination <hostname-
or-IPaddr>
ospf monitor interfaces destination
<hostname-or-IPaddr>
ospf monitor lsa destination <hostname-or-
IPaddr>
ospf monitor lsdb destination <hostname-
or-IPaddr>
ospf monitor neighborsdestination
<hostname-or-IPaddr>
ospf monitor next-hop-list destination
<hostname-or-IPaddr>
ospf monitor routes destination <hostname-
or-IPaddr>
ospf monitor statistics destination
<hostname-or-IPaddr>
ospf monitor version
ospf sbow AS-External-LSDB
ospf show all
ospf show areas
ospf show errors
ospf show export-policies
5 - 7