Defining An Ip Acl; Defining An Ipx Acl; Applying An Acl To An Interface; Applying An Acl To A Service - Cabletron Systems SmartSwitch 8-slot User's Reference Manual

Chapter 9: Security Configuration Guide

Defining an IP ACL

To define an IP ACL, perform the following in the Configure mode:
Define an IP ACL.

Defining an IPX ACL

To define an IPX ACL, perform the following in the Configure mode:
Define an IPX ACL.

Applying an ACL to an Interface

To apply an ACL to an interface, perform the following in the Configure mode:
Apply ACL to an interface.

Applying an ACL to a Service

To apply an ACL to a service, perform the following in the Configure mode:
Apply ACL to a service.

Edit an ACL with the ACL Editor

To edit an ACL, perform the following in the Configure mode:
Edit an ACL using the ACL Editor

Monitor Access Control Lists

The SSR provides display of ACL configurations contained in the system.
9 - 16
<name>
acl permit|deny
ip|tcp|udp|icmp|igmp
<srcaddr/mask>
<dstaddr/mask>
Note: Additional fields depend on the protocol type
you select.
<name>
acl permit|deny ipx|ipxrip|ipxsap
Note: Additional fields depend on the protocol type
you select.
acl apply interface
<name>
Name> input|output [logging [on|off]]
acl <name> apply service
logging [on|off]]
[
acl-edit < aclname>
|any
|any
<Interface-
<ServiceName>
SSR User Reference Manual