Set Ssr Name; Set Ssr Date And Time; Configure The Ssr Cli; Configure Snmp Services - Cabletron Systems SmartSwitch 8-slot User's Reference Manual

Chapter 1: SmartSwitch Router Product Overview

Set SSR Name

The SSR name is set to ssr by default. You may customize the name for the SSR by
performing the following in Configure mode:.
Set the SSR name.

Set SSR Date and Time

The SSR system time keeps track of time as entered by the user. No time coordination
is maintained between the SSR and a source for Universal Time. To configure the SSR
date and time, enter the following command in Enable mode:
Set SSR date and time.

Configure the SSR CLI

You can customize the CLI display format to a desired line length or row count. To
configure the CLI terminal display, enter the following command in Enable mode:
Configure the CLI terminal display.

Configure SNMP Services

The SSR accepts SNMP sets and gets from an SNMP manager. You can configure SSR
SNMP parameters including community strings and trap server target addresses.
To configure the SSR SNMP community string, enter the following command in
Configure mode:
Configure the SNMP community
string.
To configure the SNMP trap server target address, enter the following command in
Configure mode:
Configure the SNMP trap server target
address.
1 - 14
<system-name>
system set name
system set date year
<day>
day hour
<sec>
second
cli set terminal rows
snmp set community
privilege read|read-write
snmp set target <IP-addr> community <commu-
nity-name> [status enable|disable]
<year> <month>
month
<hour> <min>
min
<num>
columns
<community-name>
SSR User Reference Manual
<num>