Configure Ip Services (Icmp); Monitor Ip Parameters - Cabletron Systems SmartSwitch 8-slot User's Reference Manual

Configure IP Services (ICMP)

The SSR provides ICMP message capabilities including ping and traceroute. Ping
allows you to determine the reachability of a certain IP host. Traceroute allows you to
trace the IP gateways to an IP host.
To access ping or traceroute on the SSR, enter the following commands in Enable
mode:
Specify ping.
Specify traceroute.

Monitor IP Parameters

The SSR provides display of IP statistics and configurations contained in the routing
table. Information displayed provides routing and performance information.
To display IP information, enter the following command in Enable mode:
Show ARP table entries.
Show ARP table settings.
Show IP interface configuration
Show all TCP/UDP connections and
services.
Show configuration of IP interfaces.
Show IP routing table information.
Show ARP entries in routing table.
Show DNS parameters.
SSR User Reference Manual
Chapter 3: IP Routing Configuration Guide
<hostname-or-IPaddr>
ping
<num>
size
<num>
wait [flood] [dontroute]
<host>
traceroute
<num> <num>
] [size
<num>
] [wait-time
[noroute]
arp show entries
arp show settings
interface show ip
ip show connections [no-lookup]
ip show interfaces [ <interface-name> ]
ip show routes
ip show routes show-arps
system show dns
packets
<num>
[max-ttl ] [probes
<secs>
] [source
<secs>
] [verbose]
<num>
] [tos
3 - 5