Table of Contents
Advertisement
Information
You can use the buttons Speed, Thread tension and Stitch length to
access the sewing parameters directly ( p. 95).
• Button for Repair mode (9)
The topmost button at the right side is used for switching the repair mode
on and off. The current status (
next to the button.
16.4 General operation of the software
16.4.1 Entering a password
Depending on the setting (see chapter Changing the password
options ( p. 112)) a password is only required for accessing the
technical menus or must be entered every time the machine is started.
Next, the password entry screen is displayed.
Fig. 59: Entering a password
(1) - Input field
To enter a password:
1. Use the numeric buttons (2) to enter the password.
Information
The default password on delivery is: 25483.
The password can be changed via the
You can delete incorrect entries via the DEL button.
2. Press the OK button.
The previously selected menu item opens.
74
Ein (On)
①
②
/
Aus (Off)
(2) - Numeric buttons
Extras
menu ( p. 112).
Service Instructions 911-210-10 - 00.0 - 06/2020
Programming
) is displayed
Advertisement
Table of Contents
