Removal Of Four Way Valve Coil, Solenoid Valve Coil; Electronic Expansion Valve Coil And Thermistor - Daikin B-Series Service Manual

Si12-714
3.6 Removal of
Electronic Expansion Valve Coil
Procedure
Step
Remove 1 screw of the
1
four way valve coil.
Remove 1 screw of the
2
solenoid valve coil.
Remove the electronic
3
expansion valve coil for
each room.
Release the thermistor
4
presser spring, and
remove the discharge
pipe thermistor.
Removal Procedure
Four Way Valve
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Outdoor Unit (58 / 68 / 75 Class)
Coil, Solenoid Valve
and Thermistor
Place the thermistor so that
its end comes up to the end
of the presser spring.
Be careful not to lose the
presser spring for the
discharge pipe thermistor.
Coil,
Points
305