Si12-891
7. Removal of Four Way Valve / Outdoor Electronic
Expansion Valves
Procedure
Step
1. Remove the peripheries.
Remove the screw and
1
remove the four way
valve coil.
2
Pull out the outdoor
electronic expansion
valve coils.
3
Remove the putty.
4
Remove the terminal
cover.
Removal Procedure
Removal of Four Way Valve / Outdoor Electronic Expansion Valves
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Terminal cover
The cooling only models do
not have a four way valve.
Preparation
Remove the sound blankets
according to the "Removal of
Sound Blankets".
(R7644)
Detach the four way valve
coil and the clamp, and then
detach the wire harnesses.
(R7645)
(R7646)
(R7637)
Points
(R7703)
21