Care And Cleaning - Daikin F/GTKY50UV16V2 Operation Manual

Care

Care and Cleaning

Lh
CAUTION
• Before cleaning, be sure to stop the operation and turn off the circuit breaker.
• Do not touch the aluminium fins of the indoor unit. If you touch those parts, this may cause an injury.
• When removing or attaching the front panel, stand on a solid, stable base and take care not to fall.
• When removing or attaching the front panel, support the panel securely with your hand to
prevent it from falling.
Units
■
Indoor unit and remote controller
1. Wipe them with a dry soft cloth.
■
Front panel
1. Open the front panel.
• Hold the front panel by the indentations
in the unit and open the front panel.
2. Remove the front panel.
1) Slide the front panel to either the left or
right and pull it toward you to disengage
one of the front panel shafts.
2) Disengage the front panel shaft on
the other side in the same manner.
3) After disengaging both front panel
shafts, pull the front panel toward
yourself and remove it.
3. Clean the front panel.
• Wipe it with a soft damp cloth.
• Only neutral detergent may be used.
• In case of washing the panel with water, wipe it with a dry soft cloth, and let it dry in the shade after washing.
4. Attach the front panel.
1) Align the front panel shaft on the left
and right of the front panel with the
grooves, then push them all the way in.
2) Close the front panel slowly.
3) Press the front panel at both sides
and the centre.
• After cleaning, make sure that the
front panel is securely fixed.
NOTE
For cleaning, do not use any of the following:
• Water hotter than 40
• Volatile liquid such as benzene, petrol and thinner • Rough materials such as a scrubbing brush
11
°
C • Polishing compounds
D