Table of Contents
Advertisement
Section 700 - Operation
4. Enter the Answer Signal Code (1 to 5 digits).
5. Press the HOLD key.
To view an answer signal code:
1. Press the ON/OFF key.
2. Press the CONF key.
3. Dial "#94."
Considerations
l
l
l
Auto Day Mode
Description
Auto Day Mode allows the DBS to go into day mode automatically.
The DBS can also be programmed to go into night mode automatically (see
"Night Service," page 2-35).
If only one of the auto modes is turned on, the NIGHT key is used to turn off
the auto mode. For instance, if night mode has been activated automatically,
the attendant must press the NIGHT key to go into day mode.
If only one of the auto modes is turned on, the NIGHT key can also be used
to go into an
If both auto day and auto night modes are turned on, the attendant NIGHT
key cannot be used.
DBS-70-700
The digits used for the answer signal code are determined by the
requirements of the voice mail system.
If the called extension does not answer and is forwarded to voice mail, the
DBS sends a call forward ID code back to the voice mail system.
During transmission of the answer signai code, other DTMF digits and
functions from the DBS extension are ignored.
auto
mode before the scheduled time.
DBS Manual - Issued 8/l/95
Chapter 2. System Features
Page 2-7
Advertisement
Table of Contents
