Panasonic Section 700 Operation page 137

Section 700 - Operation
2. Dial the extension number to which the call is to be transferred.
3. When your call is answered, inform the third party of the transfer.
4. Press the PROG key.
5. Hang up to complete the transfer.
Related Programming
l
l
. FFl (System): Recall Timer for Extension-Transferred Intercom Calls
l
l
Considerations
l
l
l
For example, if phone "A" is covered to phone "B," calls that are
transferred to phone "A" will be forwarded to phone "B."
l
The EXT LED stops flashing and remains lit.
l
"Talk-EXT XXX" (where "XXX" is the extension) appears on the
l
display.
The line LED for the original outside line turns red.
l
"TRF XXX TRK #YY" (where "XXX" is the extension and "YY" is
l
the line) appears on the display.
The third party need only pick up the handset to speak to the outside
l
line.
FFI (System): Onhook (Automatic) Transfer
FFI (System): Reqall Timer for Attendant-Transferred CO Calls
The Attendant can transfer calls while the handset is still in place, even if
the system is not set for Onhook Transfer.
You cannot transfer a call to an extension that has Do Not Disturb or
Absence Message activated.
You can transfer a call to an extension that has Call Forwarding activated.
The transferred call will follow the call forwarding path of the extension it .
is transferred to.
When you transfer a call to an extension that is busy or does not answer
and does not have Call Forwarding activated, a call tone is issued at your
Chapter 4. Key Telephone Features