Line Appearances - Panasonic Section 700 Operation

Section 700 - Operation
2. Press the REDIAL key.
3. Complete the call and replace the handset.
Considerations
If the Auto Flash Redial feature is set, you can flash the outside line once
l
by pressing the REDIAL key at the busy tone. You can then redial the last
number dialed.
The Last Number Redial feature can redial a nurnber up to sixteen digits
l
long.
A maximum of five chained Speed Dialing codes can
l
"One-Touch Keys" on page 4-73 for more information.

Line Appearances

The DBS provides up to four types of line appearances, depending on the
CPC version used.
The following table summarizes how each type of line appearance is used:
Table 4-7. MC0 and ML key definitions
Direct Line (DL)
Appearances
Appearances
Multi-Line (ML)
Appearances
The last number dialed appears on the display.
The line key LED changes from green to red and then goes off.
Definition
(DSS), and busy lamp fields (BLF) for extensions.
DL keys are used to originate and receive calls over specific trunk
numbers.
ML keys are used to originate and receive CO line calls and intercom
calls.
Chapter 4. Key Telephone Features
be
redialed. See