Table of Contents
Advertisement
Section 700 - Operation
Related Programming
l
FF4 (Ringing and Hunt Groups): Extension Ring Table
l
FF5 (FF Keys): FF Key Assignments for Extensions
l
Considerations
Ringing assignments for DSS/BLF keys are assigned through system
l
programming.
If several calls arrive at an Extension Line key, the calls are queued and
l
ring on a first-in, first-out basis.
Direct Line (DL) Appearances
(CPC-AII and CPC-B Version 2.0 or higher)
Description
Direct Line keys for making and receiving outside line calls can be assigned
to any one of sixty-four CO lines. Direct Line keys have priority over Multi-
Line keys for outgoing and incoming outside line calls.
The LED for a Direct Line key will flash green on an incoming call if the CO
line is set to ring. It will flash red if the CO line is not set to ring. If another
extension answers the call, the LED on the telephone will steadily light red.
Operation
Operation
To originate a trunk call . . .
To place a call on Exclusive Trunk Hold (page 4-36)
. . .
To place a call on System Trunk Hold (page 4-17)
To transfer a call . . .
Chapter 4. Key Telephone Features
Action
Press an idle DL key.
The key blinks (green) as the call is
made.
Press the DL key.
. . .
HOLD
Press the
Press HOLD,
dial the destination
extension, and then press
key.
PROG.
4-61
Advertisement
Table of Contents
