Panasonic Section 700 Operation page 91

Chapter 3. Attendant Features
2. Dial "75."
3. Enter desired Park Number (00-09).
To retrieve a call parked by the attendant (after receiving the Park
Number from the Attendant):
1.
2.
3.
Related Programming
l
Considerations
l
l
l
3-6
The outside
call is placed on hold.
l
"CO HOLD #XX" (where "XX" is the frunk number) appears on the
l
display.
"PARK HOLD" appears on the display.
"PARK HOLD 01" appears on the display if you selected Park Number
01.
Pick up the handset.
The phone issues intercom dial toned.
Dial "76."
Enter the Park Number assigned to the call.
"PARK PICK XX" (where "XX" is the park number) appears, and then
"CO TALK ##XX" (where "XX" is the trunk number of the call) appears.
With CPC-A and CPC-B Versions prior to 3.1, an FF key assigned to Call
Park does not indicate when a call is parked. Beginning with CPC-B
Version 3.1, the FF key lights red to indicate a call is parked.
If a parked call is not answered before the Attendant Park Hold Recall
Timer expires, the parked call recalls to the attendant.
Intercom calls cannot be parked.
DBS
Manual -
Section 700 - Operation
issued 8/l/95 DBS-70-700