Panasonic Section 700 Operation page 198

Chapter 4. Key Telephone Features
Operation
To assign Personal Speed Dialing:
1. Press ON/OFF.
2. Press PROG.
3. Press a One-Touch key or press AUTO followed by the personal speed
4. If you want to include a trunk access code in the number, press CONF
5. Dial the number.
6. Press HOLD.
7. Press ON/OFF.
To use a programmed Personal Speed Dial key:
1. If the Speed Dial key includes a trunk access code, simply press the key.
2. Complete your call and replace the handset.
To check a programmed Personal Speed Dial key:
1. Press the ON/OFF key:
dial bin number (90-99 or 900-909).
then 9 or 1-6. (l-6 = trunk groups 8 l-86.)
If you enter a trunk access code in the speed dial number, you do not have
to open a trunk before using the number.
If the Speed Dial key does not include an access code, press an unlit line
key before pressing the Speed Dial key.
The phone issues outside dial tone.
l
The line LED lights green.
l
"CO TALK #XX" (where "XX" is the line number) appears on the
l
display.
The line LED changes from green to red and then goes off.
The phone issues intercom dial tone.
l
The ON/OFF LED lights.
l
Section 700 - Operation