Table of Contents
Advertisement
Chapter 4. Key Telephone Features
Feature
Voice Mail Transfer Key
6.0 or higher)
One-Touch VM Access
(CPC-AH and CPC-B Version
5.0 or higher)
l
l
l
l
l
l
Code
to be entered
CONF, AUTO AUTO, NNN XXX or AUTO Speed Dial
Note: If a password is used, it can be from 1 to 3 digits. If
the password is over 3 digits, it must be assigned to a per-
sonal or system speed dial number. Include an ending # sign
in the speed dial number if you are accessing a DBS voice
mail system.
AUTO NNN XXX or AUTO Speed Dial#
V ice ma'1
pi ot num er
I
Note: If a password is used, it can be from 1 to 3 digits. If
the password is over 3 digits, it must be assigned to a per-
sonal or system speed dial number. Include an ending # sign
in the speed dial number if you are accessing a DBS voice
mail system.
code
is programmed into a key, the previously programmed code
is erased.
To erase a code programmed into a key, press the HOLD key when the
display reads "Enter Code. " "Code Cleared" then appears on the display.
The system can be programmed so that Pooled Trunk Access calls
automatically use LCR when 9 is selected.
Night Service, DND. and BGM can be activated through FF keys without
lifting the handset.
When you are making a call using the Speed Dialing feature, the FLASH
key stored in Speed Dialing becomes the PBX flash feature.
When an extension is assigned to an FF key, the FF key changes colors to
indicate the status of the extension as follows:
72 and EM/24 keys stay solid red instead of flashing red)
set.
Section 700 - Operation
Voice mail
pilot number
Password (optional)
Password (optional)
Advertisement
Table of Contents
